.
The TSL6 generation module is upgraded. Different from the cumbersome installation method of TSL1, TSL2 and TSL3, this module TSL6 is installed at the OBD connector under the rear exhaust vent of Tesla. The operation is very simple, the installation difficulty is greatly reduced, and the performance of the module is more stable.
Note: TSL 6 for Model 3 Highland 2024+ and Model 3 Highland Performance are installed at the passenger side, not on OBD connector under the rear exhaust vent.
TSL6 can be applied to EAP/FSD versions before V 12.5 (not compatible with FSD versions V 12.5 or later).
Compared with the weight ring, this module will not affect the appearance of the steering wheel and making it easy to use. For long distance driving, this module is a better choice.
Note: If you cannot dismiss the "hands on the wheel" prompt by toggling either side of the scroll wheels, then the module does not work on your Tesla.(Unavailable on Italy, Australia,Spain,Hong Kong,Macau,Japan,Taiwan, South Korea)
In order to meet the needs of different customers, we now sell 2 versions: Only Anti-Nag Version TSL6 only has the Anti-Nag function and no any other functions. If you need other functions, please purchase the Upgraded version.
Fitment:
TSL 6: Fits Model 3(2019-2024) , Model Y(2020-2024) and Model 3 Highland 2024+(Also suitable for Model 3 Highland Performance)
Features:
- This module is used to shield Tesla Autopilot hand-held steering wheel prompts and eliminate nag. Relieve shoulder pain and fatigue. This will make your long drives easy and enjoyable.
- The working principle of this module is that the module is installed at the OBD connector in the back of tesla, the module will automatically activate the AP Do Not Disturb function when your AP is enabled, it will shut off when the vehicle powers down and enters sleep mode.. By default, the speed adjustment is triggered every 5-10 seconds, simulating hand rolling of the wheel, and the timing time adopts a random mechanism, which truly simulates the uncertainty of manual operation. (After installing the module, it can simulate pop-up speed adjustment display.It won't affect your manual speed adjustments.）
-
Please note: Triggering speed adjustment simply pops up the speed adjustment display without changing the actual speed level of your original car, nor does it distract your attention.Please don't worry.
- This upgraded TSL6 applicable to Model 3(2019-2023) and Model Y(2020-2024).
- 5-minute non-destructive installation. No need to remove screws and disconnect wires, does not affect the warranty, and can be restored to its original state at any time.
- Support online OTA upgrade.
- TSL6 does not support custom settings. It can be used directly after installation and can be removed without use.
- Please note: We have recently upgraded TSL6. The newly upgraded version of TSL6 can only trigger speed adjustment.
Detail:
- The Upgraded TSL6 electronic module, TSL1 ,TSL2, TSL3 electronic module have exactly the same functions.
- In terms of installation, the installation method of the upgraded TSL6 has been improved. The installation method of TSL 6 is simpler and faster than that of TSL1 TSL 2 and TSL3, you'll never have to take apart your steering wheel again but to install it at the OBD connector under the rear exhaust vent of Tesla. The installation difficulty is greatly reduced, and the performance of the module is more stable.
Upgraded TSL6's More Function:
Nag Elimination function is just one of the many functions of the Upgraded TSL6. Upgraded TSL6 version also has the following functions:
Physical button door opening function:
Press and hold the left reading light button to open the left rear door
Press and hold the right reading light button to open the right rear door
Press and hold the hazard warning light button to open the passenger door
(Note: The button must be pressed to open the door when the vehicle speed is 0 to take effect).
Press and hold the right reading light button to open the right rear door
Press and hold the hazard warning light button to open the passenger door
(Note: The button must be pressed to open the door when the vehicle speed is 0 to take effect).
Open the front trunk through the door handle:
When you hold the outer handle of the left front door for more than 3 seconds; or press the inner door open button of the left front door for more than 3 seconds:
You can easily open and close the front trunk (can only be closed if the electric front trunk is installed) without entering the car and clicking on the screen or taking out the mobile phone.
AP manual high beam function:
High beam can be manually controlled in AP state
When you hold the outer handle of the left front door for more than 3 seconds; or press the inner door open button of the left front door for more than 3 seconds:
You can easily open and close the front trunk (can only be closed if the electric front trunk is installed) without entering the car and clicking on the screen or taking out the mobile phone.
AP manual high beam function:
High beam can be manually controlled in AP state
Pulse high beam function:
1. Press and hold the right scroll wheel.
2. Pull the high beam lever back once to turn on the pulse high beam.
(Note: Release the right scroll wheel to turn off the pulse high beam.)
Pulse rear fog lights function:
Pulse rear fog lamp (sudden flash):
1. Press and hold the right scroll wheel.
2. Swipe the left scroll wheel once to turn on the pulse rear fog lamp
(Note: Release the right scroll wheel to turn off the pulse rear fog lamp)
Rear fog light pilot function:
1. Press and hold the right scroll wheel.
2. Swipe the left scroll wheel down once to turn on the rear fog light pilot mode.
Note: Repeat the above steps to turn off the rear fog lights.
Note: The rear fog lights must be on when the headlights are turned on.
Pulse horn function:
1. Press and hold the right scroll wheel.
2. Press the steering wheel horn once to turn on the pulse horn function.
Note: Release the right scroll wheel to turn off the pulse horn
Turn on/off the charging port via the door handle function:
When you hold the left rear door outer handle for more than 3 seconds:
You can easily open and close the charging port cover (only when the vehicle is unlocked) without entering the car and clicking on the screen or taking out your phone.
TSL6 Module Installation Steps（for Model 3 2019-2023 and Model Y 2020-2023):
TSL6 Module Installation Steps（for 2024 Model Y):
TSL6 Module Installation Steps（for 2024+Model 3 Highland):
Tips:
This product is not a safety device. Improper use of this product can cause injury or accident. The device is only used for closed road sections, not for public roads.
Disclaimer:
Your hands MUST remain on the steering wheel at all time for safety while driving. One or more states may restrict cellphones mounted to the steering wheel. Check your local laws before use.
Shipping Policy
Shipping time depends on the product.
Free shipping on all orders $59+ worldwide!
For all orders under $59, the shipping fee is $7.99.
| Product Type | Handling Time | Shipping time |
| Fast Shipping Products | 0-1 calendar days | 3-6 calendar days |
| Standard Products | 1-2 calendar days | 6-12 calendar days |
| Customized Products | 3-5 calendar days | 6-12 calendar days |
We will make every effort to deliver your package ASAP. However, additional time may be required due to invalid addresses and custom clearance issues. We have many cooperative express companies, such as DHL, FedEx, UPS, and USPS. We will choose the most suitable mode of transportation for you according to your country.
Refund Policy
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at support@evooor.com.
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at support@evooor.com.
Damages and issues
Please inspect your order upon reception and contact us within 7 days if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. (Photos of defective or damaged products are required.)
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
European Union 14 day cooling off period
Notwithstanding the above, if the merchandise is being shipped into the European Union, you have the right to cancel or return your order within 14 days, for any reason and without a justification. As above, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
Return Fee
Customers are not required to pay for return shipping if a product is returned because it is "broken, missing, or wrong." If the product is returned due to "bought wrong, I don't want it anymore", the customer shall bear the return shipping cost, and the actual shipping cost will be deducted from the refund. In either case, there is no restocking fee for returns.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 3 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at support@evooor.com.
- Choosing a selection results in a full page refresh.